Home > Floor & Dash Brackets > DBRM09
	Dealer's Price: (Members Only) Product Code: DBRM09 Qty:

Description Technical Specs   Dash Bracket Fits '09 to '18 Dodge Ram This bracket is composed of two parts and these instructions refer to the installation of the bottom part. Laramie / Sport Remove the silver trim strip around the cup holders and gear shift. Lift the rubber tray under the radio/climate control beze to expose two Philips screws. Remove these screws. Lift the console cover and set it aside. Remove the plastic square around the 115V AC outlet under the right side air vent. Remove the exposed torx screw. Lift the rubber strip from the bottom of the coin tray above the radio / navigation system. Remove the two exposed torx screws. Remove the main bezel around the radio / climate control and air vents (one piece). Grab the bottom of the bezel with both hands and apply enough force to yank it out. Lift carefully until all clips are released. Let the bezel dangle over the gear shift. Loosen the two 7 mm bolts holding the right side of the radio / nav system and slip the DBRM09 under them so that the riser hugs the side of the radio. Fasten with the two bolts. Replace all the removed parts in reverse order. Attach the top of the bracket to the bottom by using the two acorn nuts provided. SLT / ST,/b> Open the cup holder tray and then proceed to step 5. above. Features Designed to mount on the right side of the radio (navigation system) Universal mounting slots 18 gauge steel with black powder coated finish Related Items BR173 BR176 BR102 BR166 Dealer's Price: (Members Only) Dealer's Price: (Members Only) Dealer's Price: (Members Only) Dealer's Price: (Members Only) DBGM14 BR157 BR-KWNC06 BR104 Dealer's Price: (Members Only) Dealer's Price: (Members Only) Dealer's Price: (Members Only) Dealer's Price: (Members Only)

Share your knowledge of this product. Be the first to write a review »